Revision History. Internal memory. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part num- ber specified. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair.
Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration.
Keep the temperature of the soldering iron around Do not touch the soldering iron on the same conductor of the circuit board within 3 times. Be careful not to apply force on the conductor when soldering or unsoldering. Boards requiring use of unleaded solder are printed with the lead- free mark LF indicating the solder contains no lead. The size is about the size of a deck of cards. The weight of this type is only 5. That size makes it easily to slip this camera into your pocket or purse and still performs well indoors.
The colors on the screen are accurate, but it is not completely fluid with some minor lag time while the screen updates. In bright sunlight, it remains very visible. But you can choose optical viewfinder if you find difficulty in capturing image under direct sunlight.
The color choices of this type are black and silver. This camera is released at For the zoom, this camera has 3x optical zoom lens with a focal length range of 6. The aperture range of the lens is f2. You do not need to dig through menus to find your scene mode. You only need to turn the dial. Power source comes from a lithium-ion rechargeable battery pack NP-BG1. Rechargeable battery pack NP- BG1, 3.
Design and specifications are subject to change without notice. Check the area of your repair for unsoldered or poorly-soldered connections.
Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration.
After correcting the original service problem, perform the following. You can reverse the camera malfunction yourself.
However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.
0コメント